WURTH Tyre Mounting Paste 5 kg - Black
Wurth Tyre Mounting Paste Black 5 kg Rubber and Rim Care pH Neutral
For mounting car, truck and motorcycle tyres
Good sliding properties
Low force and minimal time required
Minimal use of materials
Low machine wear
Protects tyres and rim flange
Improved centring of the tyre on the rim
Short flash-off time
Positive connection between the tyre and rim is established soon after assembly
Fewer complaints and subsequent costs for any re-balancing task
Rubber and rim care
Keeps the rubber soft, thereby ensuring permanent sealing between the rim and tyre bead
Prevents rust from forming (anti-corrosive)
Prevents the tyre from sticking to the rim
pH-neutral
Not aggressive on rubber or the rim
Gentle on the skin and environmentally friendly
Suitable for run-flat tyres
Can be used for the latest tyre generations
Suitable for the tyre pressure monitoring system (TPMS)
Not harmful to health
Free from harmful solvents
Keeps the tyre bead soft and ready-to-use during summer/winter storage
Silicone-free
The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Application area
Suitable for run-flat tyres
Can be used for the latest tyre generations
Instructions
Dismantling
Force off the tyre using a suitable release mechanism
Apply the tyre mounting paste to the rim flange and tyre bead with a paintbrush or sponge
Mounting
Before the new tyres are fitted, the rim should be cleaned of old mounting adhesive around the rim flange sealing area. We recommend using our brake cleaner to do this. Remove any rust with a wire brush. Doing so will really bring the benefits of Würth tyre mounting paste to the fore.
Then apply a thin coat to the tyre bead and rim flange and fit the tyres to the rim using the fitting machine and corresponding tools. Correct mounting of tyres is a pre-requisite for smooth running characteristics.
Contents
4716.98 ml
Weight of content
5 kg
Colour
Black
Viscosity/consistency
Pasty
Chemical basis
Hydrocarbonate
Shelf life from production
24 Month
Density
1.06 g/cm³
AOX-free
Yes
Density conditions
at 20°C
Min. processing temperature
-15 °C
Max. processing temperature
50 °C
pH value
5.7
